Generator Installation

Install the generator with the 2 bolts.

Torque:

62 N*m{632 kgf*cm, 46 ft.*lbf}for bolt A

25 N*m{255 kgf*cm, 18 ft.*lbf}for bolt B

Install the generator wire with the nut.

Torque:

9.8 N*m{100 kgf*cm, 87 in.*lbf}

Install the terminal cap.

Connect the generator connector.

Rotate the tensioner pulley clockwise, and then install the V belt.

NOTICE:

Make sure that the V belt is set properly at each pulley.

Make sure that the indicator mark of the tensioner is within range A, as shown in the illustration.

Connect the air cleaner hose.

Install the cleaner with the 2 bolts.

Torque:

14 N*m{143 kgf*cm, 10 ft.*lbf}

Tighten the hose clamp of the compressor inlet elbow.

Connect the MAF meter connector and install the clamp.