Rear Door On-Vehicle Inspection


  1. INSPECT REAR DOOR PANEL SUB-ASSEMBLY LH

Rear Door -- On-Vehicle Inspection



1. INSPECT REAR DOOR PANEL SUB-ASSEMBLY LH


  1. Check that the clearance measurements of areas A to M are within the standard range.


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Engine Hood Door.Rear Door.Rear Door On-Vehicle Inspection


    Standard measurement:

    Area
    		Specified Condition
    		Area
    		Specified Condition
    A
    		5.0 +-1.5 mm (0.197 +-0.059 in.)
    		H
    		0.8 +-1.5 mm (0.079 +-0.059 in.)
    B
    		2.0 +-1.5 mm (0.079 +-0.059 in.)
    		I
    		4.5 +-1.5 mm (0.177 +-0.059 in.)
    C
    		0.0 +-1.5 mm (0.000 +-0.059 in.)
    		J
    		0.0 +-1.5 mm (0.000 +-0.059 in.)
    D
    		5.0 +-1.5 mm (0.197 +- 0.059 in.)
    		K
    		5.5 +-1.5 mm (0.216 +-0.059 in.)
    E
    		7.0 +-1.5 mm (0.276 +-0.059 in.)
    		L
    		8.9 +-1.5 mm (0.236 +-0.059 in.)
    F
    		0.0 +-1.5 mm (0.000 +-0.059 in.)
    		M
    		16.7 +-1.5 mm (0.657 +-0.059 in.)
    G
    		4.5 +-1.5 mm (4.5 +-0.059 in.)
    		-
    		-