Ecm -- Installation |
| 1. INSTALL NO. 2 ECM BRACKET |
for LHD:
Install the bracket with the 2 screws.- Torque:
- 3.0 N*m{31 kgf*cm, 27 in.*lbf}
 |
for RHD:
Install the bracket with the 2 screws.- Torque:
- 3.0 N*m{31 kgf*cm, 27 in.*lbf}
 |
| 2. INSTALL NO. 1 ECM BRACKET |
for LHD:
Install the bracket with the 3 screws.- Torque:
- 3.0 N*m{31 kgf*cm, 27 in.*lbf}
 |
for RHD:
Install the bracket with the 3 screws.- Torque:
- 3.0 N*m{31 kgf*cm, 27 in.*lbf}
 |
| 3. INSTALL ECM |
Install the ECM with the bolt and 2 nuts.
- Torque:
- 8.0 N*m{82 kgf*cm, 71 in.*lbf}
 |
Connect the 4 connectors.
| 4. INSTALL TCM (for Automatic Transmission) |
Install the TCM with the 2 bolts.
- Torque:
- 8.0 N*m{82 kgf*cm, 71 in.*lbf}
 |
Connect the 3 connectors.
| 5. INSTALL TURBO MOTOR DRIVER |
Install the turbo motor driver with the bolt.
- Torque:
- 8.0 N*m{82 kgf*cm, 71 in.*lbf}
 |
Connect the connector.
| 6. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY |
Attach the 2 hinges to install the door.
 |
While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, close the door to engage the 2 stoppers.
 |
| 7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
| 8. PERFORM REGISTRATION |
Perform registration (Toyota Fortuner RM0000012XK030X.html).
| 9. START ENGINE |
When replacing the ECM, start the engine to initialize the new ECM (Toyota Fortuner RM0000012X2005X.html).