Starter Installation


  1. INSTALL STARTER ASSEMBLY

  2. INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY

  3. INSTALL FRONT FENDER SEAL

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Starter -- Installation



1. INSTALL STARTER ASSEMBLY

  1. Connect the ground wire and install the starter with the 2 bolts.

    HINT:
    Make sure to connect the ground wire with the bolt as shown in the illustration.
    Torque:
    68 N*m{693 kgf*cm, 50 ft.*lbf}

  1. Install the starter wire to terminal 30 with the nut.

    Torque:
    9.8 N*m{100 kgf*cm, 87 in.*lbf}

  1. Connect the starter connector.



2. INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY

  1. Install the clutch release cylinder with the 2 bolts.

    Torque:
    12 N*m{122 kgf*cm, 9 ft.*lbf}


3. INSTALL FRONT FENDER SEAL

  1. Install the seal with the 5 clips.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Toyota Fortuner RM000004W63000X.html).