Starter (For Denso Made) Installation


  1. INSTALL STARTER ASSEMBLY

  2. INSTALL TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY

  3. INSTALL FRONT FENDER SEAL

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Starter (For Denso Made) -- Installation



1. INSTALL STARTER ASSEMBLY


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Install the starter and ground cable with the 2 nuts and bolt.

    Torque:
    68 N*m{693 kgf*cm, 50 ft.*lbf}

  1. Install the starter wire to terminal 30 with the nut.

    Torque:
    9.8 N*m{100 kgf*cm, 87 in.*lbf}

  1. Connect the starter connector.

  1. Attach the terminal cap.



2. INSTALL TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY

  1. Coat a new O-ring with ATF, and install it to the oil filter tube.

  1. Install the oil filter tube with the 2 bolts.

    Torque:
    12 N*m{122 kgf*cm, 9 ft.*lbf}

  1. Install the oil dipstick.



3. INSTALL FRONT FENDER SEAL

  1. Install the seal with the 5 clips.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Toyota Fortuner RM000002HD2002X.html).