Overdrive Brake Inspection

Place the overdrive support assembly onto the direct clutch assembly.

Apply compressed air (392 kPa (4 kgf/cm², 57 psi)) into the oil passage, and check that the overdrive brake piston moves smoothly.

Using a vernier caliper, measure the free length of the spring together with the spring seat.

Standard free length:

17.03 mm (0.671 in.)

Replace all discs if one of the following problems is present: 1) a disc, plate or flange is worn or burnt, 2) the lining of a disc is peeled off or discolored, or 3) grooves or printed numbers have even a little bit of damage.

NOTICE:

Before assembling new discs, soak them in ATF for at least 15 minutes.

Place the overdrive support assembly onto the direct clutch assembly.

Apply compressed air (392 kPa (4 kgf/cm², 57 psi)) into the oil passage as shown, and check that the overdrive brake piston moves smoothly.