Oil Pump Disassembly

Remove the O-ring from the oil pump.

Place the oil pump body on the torque converter clutch.

Remove the 3 oil seal rings.

Remove the 14 bolts, and then remove the stator shaft from the oil pump body.

Remove the O-ring from the oil pump body.

Remove the oil pump body from the torque converter clutch.

Using a dial indicator, measure the inside diameter of the oil pump body bushing.

Maximum inside diameter:

38.188 mm (1.504 in.)

1. If the inside diameter is greater than the maximum, replace the oil pump body.
   

Using a dial indicator, measure the inside diameter of the stator shaft bush.

Maximum inside diameter:

Front side:

21.577 mm (0.850 in.)

Rear side:

32.08 mm (1.263 in.)

1. If the inside diameter is greater than the maximum, replace the stator shaft.
   

Using a screwdriver, remove the oil seal.

NOTICE:

Be careful not to damage the bushing and oil pump body.