Extension Housing Rear Oil Seal -- Replacement |
| 1. REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY |
Remove the propeller shaft with center bearing assembly (Toyota Fortuner RM000000ZZ3008X.html).
| 2. DRAIN AUTOMATIC TRANSMISSION FLUID |
Remove the drain plug, gasket and drain ATF.
Install a new gasket and the drain plug.
- Torque:
- 28 N*m{285 kgf*cm, 21 ft.*lbf}
| 3. REMOVE AUTOMATIC TRANSMISSION EXTENSION HOUSING OIL SEAL |
 |
Using SST, remove the oil seal.
- SST
- 09308-00010
| 4. INSTALL AUTOMATIC TRANSMISSION EXTENSION HOUSING OIL SEAL |
 |
Coat the lip of the oil seal with MP grease.
Using SST and a hammer, carefully tap in a new oil seal as far as possible.
- SST
- 09316-60011(09316-00011,09316-00051)
- Oil seal depth from flat end:
- 5.4 to 5.8 mm (0.213 to 0.228 in.)
| 5. INSTALL PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY |
Install the propeller shaft with center bearing (Toyota Fortuner RM000000ZZ1008X.html).
| 6. ADD AUTOMATIC TRANSMISSION FLUID |
Inspect the automatic transmission fluid (Toyota Fortuner RM0000013BU03NX.html).
| 7. INSPECT AUTOMATIC TRANSMISSION FLUID |
Inspect the automatic transmission fluid (Toyota Fortuner RM0000013BU03NX.html).