Transmission Wire Installation


  1. INSTALL TRANSMISSION WIRE

  2. CONNECT TRANSMISSION WIRE

  3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY

  4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  6. PERFORM INITIALIZATION

  7. ADD AUTOMATIC TRANSMISSION FLUID

  8. INSPECT AUTOMATIC TRANSMISSION FLUID

Transmission Wire -- Installation



1. INSTALL TRANSMISSION WIRE


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Install a new O-ring to the transmission wire.

  1. Install the transmission wire with the bolt.

    Torque:
    5.4 N*m{55 kgf*cm, 48 in.*lbf}

  1. Connect the transmission wire connector.



2. CONNECT TRANSMISSION WIRE


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.A750E Automatic Transmission.Transmission Wire.Transmission Wire Installation

  1. Connect the 7 connectors to the solenoid valves.

  1. Install the clamp with the 2 bolts.

    Torque:
    10 N*m{100 kgf*cm, 7 ft.*lbf} for bolt A
    11 N*m{110 kgf*cm, 8 ft.*lbf} for bolt B
    HINT:
    Each bolt length is indicated below.
    Bolt length:
    12 mm (0.47 in.) for bolt A
    36 mm (1.42 in.) for bolt B

  1. Connect the ATF temperature sensor.



3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.A750E Automatic Transmission.Transmission Wire.Transmission Wire Installation

  1. Install a new O-ring and oil strainer with the 4 bolts.

    Torque:
    10 N*m{100 kgf*cm, 7 ft.*lbf}


4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.A750E Automatic Transmission.Transmission Wire.Transmission Wire Installation
HINT:
Remove the gasket and be careful not to spill oil on the contacting surfaces of the transmission case and oil pan.

  1. Install the oil pan with the 20 bolts.

    Torque:
    4.4 N*m{45 kgf*cm, 39 in.*lbf}


5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.


6. PERFORM INITIALIZATION
HINT:
Refer to "INTRODUCTION REPAIR INSTRUCTION-INITIALIZATION" and perform initialization.


7. ADD AUTOMATIC TRANSMISSION FLUID

  1. Add automatic transmission fluid (Toyota Fortuner RM0000013BU03NX.html).



8. INSPECT AUTOMATIC TRANSMISSION FLUID

  1. Inspect the automatic transmission fluid (Toyota Fortuner RM0000013BU03NX.html).