Transmission Wire -- Installation |
| 1. INSTALL TRANSMISSION WIRE |
 |
Install a new O-ring to the transmission wire.
Install the transmission wire with the bolt.
- Torque:
- 5.4 N*m{55 kgf*cm, 48 in.*lbf}
Connect the transmission wire connector.
| 2. CONNECT TRANSMISSION WIRE |
 |
Connect the 7 connectors to the solenoid valves.
Install the clamp with the 2 bolts.
- Torque:
- 10 N*m{100 kgf*cm, 7 ft.*lbf} for bolt A
- 11 N*m{110 kgf*cm, 8 ft.*lbf} for bolt B
- HINT:
- Each bolt length is indicated below.
- Bolt length:
- 12 mm (0.47 in.) for bolt A
- 36 mm (1.42 in.) for bolt B
Connect the ATF temperature sensor.
| 3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY |
 |
Install a new O-ring and the oil strainer with the 4 bolts.
- Torque:
- 10 N*m{100 kgf*cm, 7 ft.*lbf}
| 4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY |
 |
- HINT:
- Remove the gasket and be careful not to spill oil on the contacting surfaces of the transmission case and oil pan.
Install the oil pan with the 20 bolts.
- Torque:
- 4.4 N*m{45 kgf*cm, 39 in.*lbf}
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 6. ADD AUTOMATIC TRANSMISSION FLUID |
Add automatic transmission fluid (Toyota Fortuner RM0000013BU00KX.html).
| 7. INSPECT AUTOMATIC TRANSMISSION FLUID |
Inspect the automatic transmission fluid (Toyota Fortuner RM0000013BU00KX.html).