Rear Planetary Gear -- Disassembly |
| 1. REMOVE OUTPUT SHAFT |
 |
| 2. REMOVE PLANETARY OUTPUT SHAFT OIL SEAL RING |
 |
| 3. REMOVE REAR PLANETARY RING GEAR |
 |
| 4. INSPECT NO. 2 ONE-WAY CLUTCH |
 |
Hold the planetary gear and turn the one-way clutch inner race. Check that the one-way clutch inner race can be turned freely counterclockwise and locks when turned clockwise.
| 5. REMOVE NO. 2 ONE-WAY CLUTCH |
 |
Remove the inner race from the planetary gear.
Using a screwdriver, pry out the snap ring.
 |
Remove the one-way clutch with the retainers from the planetary gear.
 |
| 6. REMOVE NO. 2 PLANETARY CARRIER THRUST WASHER |
 |
| 7. REMOVE NO. 1 PLANETARY CARRIER THRUST WASHER |
 |
| 8. REMOVE REAR PLANETARY FLANGE THRUST NEEDLE ROLLER BEARING |
 |
Remove the 2 races and bearing from the planetary ring gear.
| 9. REMOVE REAR PLANETARY RING GEAR FLANGE |
 |
Using a screwdriver, pry out the snap ring.
Remove the ring gear flange.
 |
| 10. INSPECT PLANETARY PINION GEAR THRUST CLEARANCE |
 |
Using a feeler gauge, measure the thrust clearance.
- Standard clearance:
- 0.20 to 0.60 mm (0.0079 to 0.0236 in.)
- Maximum clearance:
- 0.65 mm (0.0256 in.)