Oil Pump Inspection

Using a dial indicator, measure the inside diameter of the oil pump body bush.

Maximum inside diameter:

38.19 mm (1.50 in.)

Using a dial indicator, measure the inside diameter of the stator shaft bush.

Maximum Inside Diameter:

Front side	Rear side
21.58 mm (0.850 in.)	27.08 mm (1.07 in.)

Push the driven gear to one side of the body.

Using a feeler gauge, measure the clearance.

Standard body clearance:

0.07 to 0.15 mm (0.00276 to 0.00591 in.)

Maximum body clearance:

0.2 mm (0.00787 in.)

Using a feeler gauge, measure the tip clearance between the driven gear teeth and drive gear teeth.

Standard tip clearance:

0.004 to 0.248 mm (0.000157 to 0.00976 in.)

Maximum tip clearance:

0.3 mm (0.0118 in.)

Using a steel straightedge and feeler gauge, measure the side clearance of both gears.

Standard side clearance:

0.02 to 0.05 mm (0.000787 to 0.00197 in.)

Maximum side clearance:

0.1 mm (0.00394 in.)

HINT:

There are 5 different thicknesses for drive and driven gears.

Drive and Driven Gear Thickness:

Mark	Specified Condition
M	11.690 to 11.699 mm (0.4602 to 0.4606 in.)
N	11.700 to 11.709 mm (0.4606 to 0.4610 in.)
P	11.710 to 11.720 mm (0.4610 to 0.4614 in.)
R	11.721 to 11.730 mm (0.4615 to 0.4618 in.)
S	11.731 to 11.740 mm (0.4618 to 0.4622 in.)

Make sure the drive gear rotates smoothly.

Remove the oil pump from the torque converter.