Hood Lock Control Cable Assembly -- Removal |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE RADIATOR GRILLE |
Remove the 2 screws.
 |
Using a clip remover, remove the 2 clips.
Pull the radiator grille in the direction indicated by the arrow in the illustration to detach the 6 claws and remove the radiator grille.
| 3. REMOVE HOOD LOCK ASSEMBLY |
 |
w/ Hood courtesy switch:
Detach the clamp and disconnect the connector.
Remove the 3 bolts.
Disconnect the cable and remove the lock.
| 4. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY |
Remove the open lever.
Remove the grommet from the vehicle body.
Remove the cable from the clamps as shown in the illustration.
