Air Conditioning Control Assembly Removal
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE HEATER CONTROL KNOB
REMOVE FRE/REC CONTROL KNOB
REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY CENTER
REMOVE AIR CONDITIONING CONTROL ASSEMBLY
Air Conditioning Control Assembly -- Removal |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE HEATER CONTROL KNOB |
Remove the 3 control knobs.
| 3. REMOVE FRE/REC CONTROL KNOB |
Remove the control knob.
| 4. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY CENTER |
- HINT:
- To prevent the clips from falling, horizontally pull out the panel. Hold both sides of the panel in the locations indicated by the arrows in the illustration.
Remove the screw <C>.
Detach the 6 claws and 4 clips.
- NOTICE:
- Make sure the center registers are not removed.
Disconnect all connectors and remove the panel.
| 5. REMOVE AIR CONDITIONING CONTROL ASSEMBLY |
Detach the 2 claws and disconnect the A/C control.
Detach the 2 claws and disconnect the air inlet damper control cable.
Disconnect the connector.
Detach the 2 claws and disconnect the heater control cable.
Detach the 2 claws and disconnect the air mix damper control cable.
Remove the A/C control.
