Deceleration Sensor (W/ Abs) On-Vehicle Inspection


  1. INSPECT DECELERATION SENSOR

Deceleration Sensor (W/ Abs) -- On-Vehicle Inspection



1. INSPECT DECELERATION SENSOR


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Brake Control.Deceleration Sensor (W/ Abs).Deceleration Sensor (W/ Abs) On-Vehicle Inspection

  1. Connect 3 dry cell batteries of 1.5 V in series (approximately 4.5 V total).

  1. Connect the batteries' positive (+) lead to terminal 3 (VGS) and the negative (-) lead to terminal 2 (GGND).

    NOTICE:
    Do not apply 6 V or higher to terminals 3 (VGS) and 2 (GGND).

  1. Connect the voltmeter's positive (+) lead to the negative (-) lead of the batteries, and the negative (-) lead to terminal 1 (GL1).

  1. Check the output voltage of terminal 1 (GL1) when the sensor is tilted forward and rearward.

    Standard voltage:
    Tester Connection
    		Sensor Position
    		Specified Condition
    1 (GL1) - Battery's negative (-) lead
    		Horizontal
    		Approx. 2.25 V
    1 (GL1) - Battery's negative (-) lead
    		Tilted forward
    		Approx. 0.45 to 2.25 V
    1 (GL1) - Battery's negative (-) lead
    		Tilted rearward
    		Approx. 2.25 to 4.05 V
    If the result is not as specified, replace the deceleration sensor.
    HINT:
    1. If voltage drops, the sensor should be replaced with a new one.
    2. When replacing the sensor, it should not be placed upside down.