Meter / Gauge System -- System Description |
| METER GAUGE AND WARNING/INDICATOR LIGHT |
| Item | Signal Description |
| Speedometer | Calculates vehicle speed based on signal from vehicle speed sensor |
| Tachometer | Calculates engine speed based on signal from ECM |
| ODO/TRIP Meter | Calculates distance vehicle is driven or distance since trip meter knob is pressed |
| Fuel | Indicates remaining amount of fuel based on signal from fuel sender gauge |
| Engine Coolant Temperature | Indicates engine coolant temperature based on signal from ECM |
| Item | Signal Description |
| TURN | Blinks when receiving signal that turn signal switch or hazard warning signal switch is ON |
| HIGH BEAM | Illuminates when headlight dimmer switch is set to HI BEAM or FLASH |
| CHARGE | Illuminates when receiving malfunction signal from generator |
| OIL PRESSURE | Illuminates when receiving "oil pressure is abnormally low (pressure switch is ON)" signal |
| MIL | Illuminates when receiving malfunction signal from ECM |
| DOOR | Illuminates when receiving each door courtesy light switch signal |
| SEAT BELT | Blinks when driver's seat belt buckle switch is unfastened |
| BRAKE | Illuminates when receiving signal that parking brake switch is ON, brake fluid warning switch is ON, or brake vacuum warning switch*1 is ON |
| GLOW*1 | Illuminates when receiving engine is too cold to start (glow heater is ON) signal from ECM |
| FUEL FILTER*1 | Illuminates when fuel filter is clogged and blinks when certain amount of water is accumulated at bottom of fuel filter |
| T-BELT*1 | Illuminates when odometer's display is 150000 km/h |
| ABS | Illuminates when receiving malfunction signal from skid control ECU with actuator |
| SRS | Illuminates when receiving malfunction signal from center airbag sensor assembly |
| FUEL | Illuminates when receiving fuel empty signal from fuel sender gauge |
| P*2 | Illuminates when receiving P signal from park / neutral position switch |
| R*2 | Illuminates when receiving R signal from park / neutral position switch |
| N*2 | Illuminates when receiving N signal from park / neutral position switch |
| D*2 | Illuminates when receiving D signal from shift lock control ECU |
| 4*9 | Illuminates when receiving 4 signal from shift lock control ECU |
| 3*2 | Illuminates when receiving 3 signal from shift lock control ECU |
| 2*2 | Illuminates when receiving 2 signal from park / neutral position switch |
| L*2 | Illuminates when receiving L signal from park / neutral position switch |
| A/T P*2, *3 | Illuminates when receiving transfer shift lever is on N and automatic transmission shift lever is on P signal |
| A/T OIL TEMP*2, *3 | Illuminates when receiving ATF temperature is too high signal from ECM |
| FR FOG*4 | Illuminates when front fog light switch is ON |
| CRUISE*5 | Illuminates when receiving cruise control system is operating properly signal from ECM |
| CENTER DIFFERENTIAL LOCK*6 | Illuminates when receiving center differential lock signal from transfer indicator switch |
| REAR DIFFERENTIAL LOCK*7 | Illuminates when receiving rear differential lock signal from four wheel drive control ECU |
| LEVELING*8 | Illuminates when receiving LEVELING signal from headlight leveling ECU assembly |
| VSC OFF*10 | Illuminates when receiving VSC OFF switch is ON signal from skid control ECU with actuator |
| SLIP*10 | Illuminates when receiving malfunction signal from skid control ECU with actuator |
*2: for Automatic Transmission
*3: for 4WD
*4: w/ Front Fog Light
*5: w/ Cruise Control System
*6: w/ Center Differential Lock System
*7: w/ Rear Differential Lock System
*8: for HID Headlight
*9: for A750E, A750F
*10: w/ VSC
| Item | Signal Description |
| Light Reminder | Buzzer is ON when ignition switch is off, light control switch is set to TAIL or HEAD, and driver side door is open |
| Seat Belt Reminder | Buzzer is ON when vehicle speed 15 km/h (9 mph) or more and driver side seat belt is unfastened |
| Fuel Sedimenter Buzzer* | Buzzer is ON when fuel sedimenter switch is ON |
- *: for 1KD-FTV, 2KD-FTV, 5L-E
| COMBINATION METER HAS FOLLOWING FEATURES |
Odometer and trip meter knob
- Press and release the knob to scroll through trip "A", trip "B" and odometer figures.
- Press and hold the knob to reset the trip meter.
- Press and release the knob to scroll through trip "A", trip "B" and odometer figures.
Multi-display (Accessory meter assembly)*
- The multi-display provides the following information: 1) outside temperature; 2) average fuel consumption for a certain distance; 3) instantaneous fuel consumption; 4) average speed for a certain distance; 5) runnable distance with the remaining amount of fuel; 6) compass; and 7) elapsed time since the ignition switch was turned ON.
- Press INFO to change the display item.
- Press RESET to clear the stored data.
- Press H to adjust the hour of the clock.
- Press M to adjust the minutes of the clock.
- Press 00 to set the minutes to 00.
- The multi-display provides the following information: 1) outside temperature; 2) average fuel consumption for a certain distance; 3) instantaneous fuel consumption; 4) average speed for a certain distance; 5) runnable distance with the remaining amount of fuel; 6) compass; and 7) elapsed time since the ignition switch was turned ON.