Counter Gear And Reverse Idler Gear Removal


  1. REMOVE NO. 2 COUNTER GEAR FRONT BEARING SNAP RING

  2. REMOVE COUNTER GEAR FRONT BEARING

  3. INSPECT COUNTER GEAR

Counter Gear And Reverse Idler Gear -- Removal



1. REMOVE NO. 2 COUNTER GEAR FRONT BEARING SNAP RING


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.R150F R151F Manual Transmission.Counter Gear And Reverse Idler Gear.Counter Gear And Reverse Idler Gear Removal

  1. Using a snap ring expander, remove the snap ring from the counter gear.



2. REMOVE COUNTER GEAR FRONT BEARING


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.R150F R151F Manual Transmission.Counter Gear And Reverse Idler Gear.Counter Gear And Reverse Idler Gear Removal

  1. Using SST and a press, press out the front bearing from the counter gear.

    SST
    09950-00020
    09950-60010(09951-00220)
    09950-70010(09951-07100)


3. INSPECT COUNTER GEAR


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.R150F R151F Manual Transmission.Counter Gear And Reverse Idler Gear.Counter Gear And Reverse Idler Gear Removal

  1. Using a micrometer, measure the outside diameter of the counter gear as shown in the illustration.

    Standard outside diameter:
    29.984 to 30.000 mm (1.1805 to 1.1811 in.)
    Minimum outside diameter:
    29.984 mm (1.1805 in.)
    If the outside diameter is less than the minimum, replace the counter gear with a new one.