Counter Gear And Reverse Idler Gear Installation

Using SST and a press, press in the front bearing to the counter gear.

SST

09515-10010

NOTICE:

Install the front bearing so that the snap ring groove of the bearing faces to the front side.

Select a snap ring so that the clearance between the counter gear and snap ring is within the specification.

Standard clearance:

0.10 mm (0.0039 in.) or less

Standard snap ring thickness:

Mark	Thickness
A	2.05 to 2.10 mm (0.0807 to 0.0827 in.)
B	2.10 to 2.15 mm (0.0827 to 0.0846 in.)
C	2.15 to 2.20 mm (0.0846 to 0.0866 in.)
D	2.20 to 2.25 mm (0.0866 to 0.0886 in.)
E	2.25 to 2.30 mm (0.0886 to 0.0906 in.)
F	2.30 to 2.35 mm (0.0906 to 0.0925 in.)

Using a snap ring expander, install the snap ring.