Input Shaft Installation

Using SST and a press, press in a new front bearing to the input shaft.

SST

09950-60010(09951-00570)
09950-70010(09951-07100)

NOTICE:

Set the snap ring groove of the input shaft front bearing to the front side.

Select a snap ring so that the clearance between the input shaft and front bearing is within the specification.

Standard clearance:

0.10 mm (0.0039 in.) or less

Standard snap ring thickness:

Mark	Thickness
A	2.10 to 2.15 mm (0.0827 to 0.0846 in.)
B	2.15 to 2.20 mm (0.0846 to 0.0866 in.)
C	2.20 to 2.25 mm (0.0866 to 0.0886 in.)
D	2.25 to 2.30 mm (0.0886 to 0.0906 in.)
E	2.30 to 2.35 mm (0.0906 to 0.0925 in.)
F	2.35 to 2.40 mm (0.0925 to 0.0945 in.)
G	3.40 to 2.45 mm (0.0945 to 0.0965 in.)

Using a snap ring expander, install the snap ring.

Apply gear oil to the input shaft bearing, and install it to the input shaft.

Apply gear oil to No. 2 synchronizer ring, and install it to the input shaft.