High Mounted Stop Light Assembly Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE TAIL GATE SERVICE HOLE COVER

  3. REMOVE CENTER STOP LIGHT ASSEMBLY

High Mounted Stop Light Assembly -- Removal



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE TAIL GATE SERVICE HOLE COVER


3. REMOVE CENTER STOP LIGHT ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Disconnect the connector.

  1. Remove the 2 screws and center stop light.