License Plate Light Assembly Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE BACK DOOR TRIM BOARD ASSEMBLY

  3. REMOVE BACK DOOR OUTSIDE GARNISH

  4. REMOVE LICENSE PLATE LIGHT ASSEMBLY

License Plate Light Assembly -- Removal


HINT:
  1. Use the same procedures for the RH and LH side.
  2. The procedures listed below are for the LH side.


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE BACK DOOR TRIM BOARD ASSEMBLY

  1. Using a screwdriver, detach the 16 clips and remove the trim board.

    HINT:
    Tape the screwdriver tip before use.


3. REMOVE BACK DOOR OUTSIDE GARNISH

  1. Remove the 5 nuts.



  1. Detach the 2 clips and remove the garnish.


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Lighting.License Plate Light Assembly.License Plate Light Assembly Removal



4. REMOVE LICENSE PLATE LIGHT ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Remove the 4 screws and license plate light.