Clutch Release Cylinder (For 5L-E, 2Tr-Fe) Reassembly


  1. INSTALL RELEASE CYLINDER BLEEDER PLUG

  2. INSTALL CLUTCH RELEASE CYLINDER KIT

Clutch Release Cylinder (For 5L-E, 2Tr-Fe) -- Reassembly



1. INSTALL RELEASE CYLINDER BLEEDER PLUG
Torque:
11 N*m{112 kgf*cm, 8 ft.*lbf}


2. INSTALL CLUTCH RELEASE CYLINDER KIT

  1. Install the bleeder plug cap to the bleeder plug.

  1. Install a new spring to the bleeder plug.



    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Clutch.Clutch Release Cylinder (For 5L-E, 2Tr-Fe).Clutch Release Cylinder (For 5L-E, 2Tr-Fe) Reassembly

  1. Apply lithium soap base glycol grease to areas indicated by the arrows in the illustration.

  1. Install the piston to the cylinder body.

    NOTICE:
    Be careful not to damage the inside of the cylinder body.

  1. Install the push rod to the boot.

  1. Install the boot (with push rod) to the cylinder body.