Clutch Release Cylinder (For Kd Series Engine) Reassembly


  1. INSTALL RELEASE CYLINDER BLEEDER PLUG

  2. INSTALL CLUTCH RELEASE CYLINDER KIT

Clutch Release Cylinder (For Kd Series Engine) -- Reassembly



1. INSTALL RELEASE CYLINDER BLEEDER PLUG
Torque:
11 N*m{112 kgf*cm, 8 ft.*lbf}


2. INSTALL CLUTCH RELEASE CYLINDER KIT

  1. Install the bleeder plug cap to the bleeder plug.

  1. Install a new spring to the bleeder plug.



    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Clutch.Clutch Release Cylinder (For Kd Series Engine).Clutch Release Cylinder (For Kd Series Engine) Reassembly

  1. Apply lithium soap base glycol grease to the areas indicated by the arrows in the illustration.

  1. Install a new piston to the cylinder body.

    NOTICE:
    Be careful not to damage the inside of the cylinder body.

  1. Install the push rod to the boot.

  1. Install the boot (with push rod) to the cylinder body.