Front Lower Suspension Arm Inspection


  1. INSPECT FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER LH

Front Lower Suspension Arm -- Inspection



1. INSPECT FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER LH


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Suspension.Front Lower Suspension Arm.Front Lower Suspension Arm Inspection

  1. As shown in the illustration, move the ball joint stud back and forth 5 times before installing the nut.

  1. Using a torque wrench, turn the nut continuously at a rate of 3 to 5 seconds per turn and take the torque reading on the fifth turn.

    Standard turning torque:
    0.29 to 4.5 N*m (3 to 46 kgf*cm, 3 to 40 in.*lbf) or less

  1. Check for any cracks and grease leaks on the ball joint dust cover.