Park / Neutral Position Switch Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. DISCONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR

  3. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

Park / Neutral Position Switch -- Removal



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. DISCONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR


3. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.A750F Automatic Transmission.Park / Neutral Position Switch.Park / Neutral Position Switch Removal

  1. Using a screwdriver, pry out the lock washer.

  1. Remove the lock nut and lock washer.

  1. Remove the bolt and park/neutral position switch.

    HINT:
    Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the detent spring may become detached from the manual valve lever shaft.