Front Differential Carrier Assembly Installation
INSTALL FRONT DIFFERENTIAL CARRIER ASSEMBLY
INSTALL FRONT DRIVE SHAFT ASSEMBLY LH
INSTALL FRONT DRIVE SHAFT ASSEMBLY RH
INSTALL FRONT AXLE ASSEMBLY LH
INSTALL FRONT AXLE ASSEMBLY RH
INSTALL NO.1 FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER LH
INSTALL NO.1 FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER RH
INSTALL TIE ROD END SUB-ASSEMBLY LH
INSTALL TIE ROD END SUB-ASSEMBLY RH
INSTALL FRONT STABILIZER LINK ASSEMBLY LH
INSTALL FRONT STABILIZER LINK ASSEMBLY RH
INSTALL FRONT AXLE SHAFT LH NUT
INSTALL FRONT AXLE SHAFT RH NUT
INSPECT FRONT AXLE HUB BEARING BACKLASH
INSPECT FOR FRONT AXLE HUB DEVIATION
INSTALL FRONT PROPELLER SHAFT ASSEMBLY
REFILL DIFFERENTIAL OIL
CHECK FOR DIFFERENTIAL OIL LEAKAGE
INSTALL NO. 2 ENGINE UNDER COVER
INSTALL NO. 1 ENGINE UNDER COVER
INSTALL FRONT SIDE MEMBER TO FRONT SUSPENSION CROSSMEMBER BRACE
INSTALL FRONT WHEEL
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
Front Differential Carrier Assembly -- Installation |
| 1. INSTALL FRONT DIFFERENTIAL CARRIER ASSEMBLY |
Install the front No. 3 differential support with the 2 bolts.
- Torque:
- 108 N*m{1,100 kgf*cm, 80 ft.*lbf}
Install the front No. 2 differential support with the 2 bolts.
- Torque:
- 160 N*m{1,630 kgf*cm, 118 ft.*lbf}
Install the front No. 1 differential support with the 3 bolts.
- Torque:
- 186 N*m{1,900 kgf*cm, 137 ft.*lbf}
Support the front differential with a jack.
Install the 2 mounting bolts and 2 nuts.
- Torque:
- 137 N*m{1,400 kgf*cm, 101 ft.*lbf}
Install the front No. 1 differential mounting nut.
- Torque:
- 87 N*m{887 kgf*cm, 64 ft.*lbf}
Install the front differential breather tube bracket with the bolt.
- Torque:
- 13 N*m{133 kgf*cm, 10 ft.*lbf}
Lower the jack.
| 2. INSTALL FRONT DRIVE SHAFT ASSEMBLY LH |
Install the drive shaft (Toyota Fortuner RM000000ZZA002X.html).
| 3. INSTALL FRONT DRIVE SHAFT ASSEMBLY RH |
Install the drive shaft (Toyota Fortuner RM000000ZZA002X.html).
| 4. INSTALL FRONT AXLE ASSEMBLY LH |
Install the front axle (Toyota Fortuner RM00000112K004X.html).
| 5. INSTALL FRONT AXLE ASSEMBLY RH |
Install the front axle (Toyota Fortuner RM00000112K004X.html).
| 6. INSTALL NO.1 FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER LH |
Install the suspension arm lower (Toyota Fortuner RM0000010OR002X.html).
| 7. INSTALL NO.1 FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER RH |
Install the suspension arm lower (Toyota Fortuner RM0000010OR002X.html).
| 8. INSTALL TIE ROD END SUB-ASSEMBLY LH |
Install the tie rod end (Toyota Fortuner RM000001641003X.html).
| 9. INSTALL TIE ROD END SUB-ASSEMBLY RH |
Install the tie rod end (Toyota Fortuner RM000001641003X.html).
| 10. INSTALL FRONT STABILIZER LINK ASSEMBLY LH |
Install the stabilizer link (Toyota Fortuner RM0000010OV002X.html).
| 11. INSTALL FRONT STABILIZER LINK ASSEMBLY RH |
Install the stabilizer link (Toyota Fortuner RM0000010OV002X.html).
| 12. INSTALL FRONT AXLE SHAFT LH NUT |
Install the axle hub nut (Toyota Fortuner RM00000112K004X.html).
| 13. INSTALL FRONT AXLE SHAFT RH NUT |
Install the axle hub nut (Toyota Fortuner RM00000112K004X.html).
| 14. INSPECT FRONT AXLE HUB BEARING BACKLASH |
Inspect the axle hub bearing backlash (Toyota Fortuner RM00000112N004X.html).
| 15. INSPECT FOR FRONT AXLE HUB DEVIATION |
Inspect for axle hub bearing deviation (Toyota Fortuner RM00000112N004X.html).
| 16. INSTALL FRONT PROPELLER SHAFT ASSEMBLY |
Install the propeller shaft (Toyota Fortuner RM000000ZYG008X.html).
| 17. REFILL DIFFERENTIAL OIL |
Refill differential oil (Toyota Fortuner RM0000010MD004X.html).
| 18. CHECK FOR DIFFERENTIAL OIL LEAKAGE |
| 19. INSTALL NO. 2 ENGINE UNDER COVER |
| 20. INSTALL NO. 1 ENGINE UNDER COVER |
| 21. INSTALL FRONT SIDE MEMBER TO FRONT SUSPENSION CROSSMEMBER BRACE |
| 23. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 24. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT |
Inspect and adjust the front wheel alignment (Toyota Fortuner RM0000010MX004X.html).
