Brake Actuator (W/ Abs) Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. DRAIN BRAKE FLUID

  3. REMOVE BRAKE ACTUATOR ASSEMBLY WITH BRACKET

Brake Actuator (W/ Abs) -- Removal



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. DRAIN BRAKE FLUID
NOTICE:
Wash off brake fluid immediately if it comes in contact with any painted surface.


3. REMOVE BRAKE ACTUATOR ASSEMBLY WITH BRACKET


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Brake Control.Brake Actuator (W/ Abs).Brake Actuator (W/ Abs) Removal

  1. Place tags or marks to identify the installation locations of each brake line.



    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Release the latch of the actuator connector and disconnect the connector.

  1. Using SST, disconnect the 5 brake lines from the actuator.

    SST
    09023-00101


  1. Remove the 3 nuts and actuator with bracket.

    NOTICE:
    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50
    Be careful not to damage the brake tubes.