Front Speed Sensor Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE FRONT WHEEL

  3. REMOVE FRONT SPEED SENSOR LH

Front Speed Sensor -- Removal


HINT:
  1. Use the same procedures for the LH side and RH side.
  2. The procedures listed below are for the LH side.


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE FRONT WHEEL


3. REMOVE FRONT SPEED SENSOR LH

  1. Disconnect the sensor connector labeled A.

  1. Disconnect the 6 clamps labeled B.

  1. Remove the 3 bolts labeled C and disconnect the 3 brackets.

  1. Disconnect the 2 clamps labeled D.



  1. Remove the bolt labeled E and sensor.

    NOTICE:
    Keep the sensor tip and sensor installation hole free from foreign matter.

    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Brake Control.Front Speed Sensor.Front Speed Sensor Removal