Front Speed Sensor Installation


  1. INSTALL FRONT SPEED SENSOR LH

  2. INSTALL FRONT WHEEL

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  4. CHECK ABS SPEED SENSOR SIGNAL

Front Speed Sensor -- Installation


HINT:
  1. Use the same procedures for the LH side and RH side.
  2. The procedures listed below are for the LH side.


1. INSTALL FRONT SPEED SENSOR LH

  1. Install the speed sensor with the bolt labeled A.

    Torque:
    8.5 N*m{87 kgf*cm, 75 in.*lbf}
    NOTICE:
    Keep the sensor tip and sensor installation hole free from foreign matter.

  1. Connect the 2 clamps labeled B.

    NOTICE:
    Do not twist the sensor wire when installing the clamps.

  1. Install the 3 brackets with the 3 bolts labeled C.

    Torque:
    32 N*m{326 kgf*cm, 24 ft.*lbf}
    NOTICE:
    Do not twist the sensor wire when installing the brackets.

  1. Connect the 6 clamps labeled D.

    NOTICE:
    Do not twist the sensor wire when installing the clamps.


  1. Connect the sensor connector labeled E.


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Brake Control.Front Speed Sensor.Front Speed Sensor Installation



2. INSTALL FRONT WHEEL
Torque:
105 N*m{1071 kgf*cm, 77 ft.*lbf}


3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


4. CHECK ABS SPEED SENSOR SIGNAL

  1. Check the ABS speed sensor signal (Toyota Fortuner RM00000102M00BX.html).