Front Airbag Sensor Removal


  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE RADIATOR GRILLE

  4. REMOVE BATTERY CLAMP SUB-ASSEMBLY

  5. REMOVE BATTERY

  6. REMOVE FRONT AIRBAG SENSOR LH

Front Airbag Sensor -- Removal


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Toyota Fortuner RM000000UYX010X.html).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Toyota Fortuner RM000004W63000X.html).


3. REMOVE RADIATOR GRILLE


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Remove the 2 clips and 2 screws.



    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Supplemental Restraint System.Front Airbag Sensor.Front Airbag Sensor Removal

  1. Put protective tape around the radiator grille.

    Text in Illustration
    *1
    		Protective Tape

  1. Detach the 6 claws and remove the radiator grille.



4. REMOVE BATTERY CLAMP SUB-ASSEMBLY

  1. Remove the bolt and battery bracket.



5. REMOVE BATTERY

  1. Disconnect the cable from positive (+) battery terminal.

  1. Remove the battery.



6. REMOVE FRONT AIRBAG SENSOR LH


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Remove the nut and front airbag sensor LH.

  1. Disconnect the connector.