Front Airbag Sensor -- Installation |
- CAUTION:
- Be sure to read the precautionary notices concerning the SRS airbag system before servicing it (Toyota Fortuner RM000000YVR005X.html).
| 1. INSTALL FRONT AIRBAG SENSOR LH |
 |
Install the sensor with the nut.
- Torque:
- 17.5 N*m{179 kgf*cm, 13 ft.*lbf}
- NOTICE:
- If the airbag sensor has been dropped, or there are any cracks, dents or other defects in the case or connector, replace it with a new one.
- When installing the airbag sensor, make sure that the SRS wiring does not interfere with other parts and is not pinched between other parts.
Check that there is no free play in the installation parts of the sensor.
Connect the sensor connector.
| 2. INSTALL FRONT AIRBAG SENSOR RH |
 |
Install the sensor with the nut.
- Torque:
- 17.5 N*m{179 kgf*cm, 13 ft.*lbf}
- NOTICE:
- If the airbag sensor has been dropped, or there are any cracks, dents or other defects in the case or connector, replace it with a new one.
- When installing the airbag sensor, make sure that the SRS wiring does not interfere with other parts and is not pinched between other parts.
Check that there is no free play in the installation parts of the sensor.
Connect the sensor connector.
| 3. INSTALL BATTERY |
Install the battery.
Install the battery stay with the 2 bolts.
Connect the cable to the positive (+) battery terminal.
| 4. INSTALL AIR CLEANER ASSEMBLY |
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 6. INSTALL RADIATOR GRILLE |
Attach the 6 claws to install the radiator grille.
 |
Install the 2 clips and 2 screws.
| 7. CHECK SRS WARNING LIGHT |
Check the SRS warning light (Toyota Fortuner RM000000YVX004X.html).