Center Airbag Sensor Assembly Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)

  3. REMOVE TRANSFER SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)

  4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

  5. REMOVE CONSOLE BOX ASSEMBLY

  6. REMOVE CENTER AIRBAG SENSOR ASSEMBLY

Center Airbag Sensor Assembly -- Removal


CAUTION:
Be sure to read the precautionary notices concerning the SRS airbag system before servicing it (Toyota Fortuner RM000000YVR005X.html).


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)


3. REMOVE TRANSFER SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)


4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Supplemental Restraint System.Center Airbag Sensor Assembly.Center Airbag Sensor Assembly Removal
NOTICE:
Be careful not to damage the instrument panel lower and console box with the claws of the upper console panel.

  1. Detach the 12 claws and remove the console panel.



5. REMOVE CONSOLE BOX ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Supplemental Restraint System.Center Airbag Sensor Assembly.Center Airbag Sensor Assembly Removal

  1. Remove the 4 screws <F> and 2 bolts <E>.

  1. Using a clip remover, remove the 2 clips and console box.



6. REMOVE CENTER AIRBAG SENSOR ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Disconnect the sensor connector.

  1. Remove the 3 bolts and sensor.