Anti-Lock Brake System Dtc Check / Clear

  1. CHECK DTC (When not Using Intelligent Tester)

  1. CHECK DTC (When Using Intelligent Tester)

  1. CLEAR DTC (When not Using Intelligent Tester)

  1. CLEAR DTC (When Using Intelligent Tester)

  1. CHECK ABS WARNING LIGHT

Anti-Lock Brake System -- Dtc Check / Clear



CHECK DTC (When not Using Intelligent Tester)
Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Brake Control.Anti-Lock Brake System.Anti-Lock Brake System Dtc Check / Clear

  1. Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.

    SST
    09843-18040

  2. Turn the ignition switch ON.

  3. Read the DTC from the ABS warning light on the combination meter.

    HINT:
    1. If no code appears, check the TC and CG circuit or ABS warning light circuit.
      Trouble Area
      		See procedure
      TC and CG terminal circuit
      		Toyota Fortuner RM00000104J00AX.html
      ABS warning light circuit
      		Toyota Fortuner RM00000104E00BX.html
    2. If more than 1 DTC is detected at the same time, the DTCs will be displayed in numerical order.

    3. Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Brake Control.Anti-Lock Brake System.Anti-Lock Brake System Dtc Check / Clear
      As an example, the blinking patterns for a normal system code and DTCs 11 and 21 are shown in the illustration.
    4. DTCs are explained in the Diagnostic Trouble Code Chart.

  4. After completing the check, disconnect terminals 13 (TC) and 4 (CG) of the DLC3, and turn off the display.


CHECK DTC (When Using Intelligent Tester)
Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Brake Control.Anti-Lock Brake System.Anti-Lock Brake System Dtc Check / Clear

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch ON.

  3. Read the DTCs by following the prompts on the tester screen.

    HINT:
    Refer to the intelligent tester operator's manual for further details.

CLEAR DTC (When not Using Intelligent Tester)
Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Brake Control.Anti-Lock Brake System.Anti-Lock Brake System Dtc Check / Clear

  1. Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.

    SST
    09843-18040

  2. Turn the ignition switch ON.



    3. Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  3. Clear the DTCs stored in the ECU by depressing the brake pedal 8 times or more within 5 seconds.

  4. Check that the ABS warning light displays the normal system code.

  5. Remove SST from the terminals of the DLC3.

    HINT:
    DTCs cannot be cleared by removing the battery cable or ECU-IG & GAUGE fuse.

CLEAR DTC (When Using Intelligent Tester)
Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Brake Control.Anti-Lock Brake System.Anti-Lock Brake System Dtc Check / Clear

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch ON.

  3. Operate the intelligent tester to erase the codes.

    HINT:
    Refer to the intelligent tester operator's manual for further details.

CHECK ABS WARNING LIGHT

  1. Turn the ignition switch ON.

  2. Check that the ABS warning light illuminates and then turns off in approximately 3 seconds.