Front Seat Assembly (W/ Front Seat Side Airbag) Disassembly

w/ Passenger Seat Belt Warning Light:

1. Detach the 2 clamps.
   

2. Disconnect the connector.
   





3. Detach the wire harness from the clamp.
   

4. Remove the nut and seat belt.
   

5. Remove the buckle cover.
   

w/o Passenger Seat Belt Warning Light:

1. Remove the nut and seat belt.
   

2. Remove the buckle cover.
   

Remove the front seat cushion cover LH.

Remove the 2 screws.

Detach the 2 hooks in the order shown in the illustration and remove the front seat inner cushion shield LH.

Raise the reclining adjuster release handle LH to reveal the claw. Using a screwdriver, detach the claw and remove the reclining adjuster release handle LH.

HINT:

Tape the screwdriver tip before use.

Remove the 2 screws.

Detach the 2 hooks in the order shown in the illustration, and then detach the guide and remove the front seat cushion shield LH.

Remove the seatback spring LH.

Detach the 3 front seat airbag wire harness clamps.

Remove the hog rings and fold back the separate type front seat cushion cover and rubber bands of the separate type front seatback cover.

Remove the 4 bolts and separate type front seatback assembly.

Remove the hog rings, and then roll up the separate type front seatback cover.

Pass the front seat airbag wire harness through the hole of the separate type front seatback cover, and then roll up the separate type front seatback cover.

Remove the hog rings and detach the 2 straps of the separate type front seatback cover, and then roll up the separate type front seatback cover.

Pass the strap of the separate type front seatback cover through the holes of the separate type front seatback pad.

Remove the nut and detach the separate type front seatback cover bracket.

Remove the hog rings and roll up the separate type front seatback cover.

Detach the 4 claws and remove the 2 front seat headrest supports and separate type front seatback cover from the separate type front seatback pad.

Remove the separate type front seatback pad from the separate type front seatback spring assembly.

Remove the No. 1 seatback cloth from the separate type front seatback spring assembly.

Detach the wire harness clamp.

Remove the hog rings.

Bend the 2 front seat cushion frame claws upward.

Detach the hooks and remove the separate type front seat cushion cover together with the pad from the front seat cushion frame sub-assembly LH.

Remove the hog rings and separate type front seat cushion cover from the separate type front seat cushion pad.

Remove the 2 front seat cushion protectors.

Remove the 4 bolts and front seat cushion frame sub-assembly LH from the lower reclining adjuster arm sub-assembly RH and the lower reclining adjuster arm sub-assembly LH.

Using a screwdriver, detach the 2 springs and remove the seat track handle sub-assembly LH as shown in the illustration.

HINT:

The seat track handle sub-assembly LH will get caught on the springs when removing it. Detach the springs to remove the seat track handle sub-assembly LH.

Remove the 3 bolts and lower reclining adjuster arm sub-assembly LH.

HINT:

Use the same procedure described for the LH side.

Remove the front seat cushion edge protector LH.