Front Seat Assembly (W/ Front Seat Side Airbag) Removal


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE INNER SEAT TRACK BRACKET COVER

  3. REMOVE OUTER SEAT TRACK BRACKET COVER

  4. REMOVE FRONT SEAT HEADREST ASSEMBLY

  5. REMOVE FRONT SEAT ASSEMBLY

Front Seat Assembly (W/ Front Seat Side Airbag) -- Removal


HINT:
  1. Use the same procedures for the RH side and LH side.
  2. The procedures listed below are for the RH side.


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Toyota Fortuner RM000002HD2002X.html).


2. REMOVE INNER SEAT TRACK BRACKET COVER

  1. Lift up the seat track adjusting handle and move the seat to the foremost position.



    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Using a screwdriver, detach the 2 claws and remove the cover.

    HINT:
    Tape the screwdriver tip before use.


3. REMOVE OUTER SEAT TRACK BRACKET COVER


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Using a screwdriver, detach the 2 claws and remove the cover.

    HINT:
    Tape the screwdriver tip before use.


4. REMOVE FRONT SEAT HEADREST ASSEMBLY


5. REMOVE FRONT SEAT ASSEMBLY


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Remove the 2 bolts.

  1. Lift up the seat track adjusting handle and move the seat to the rearmost position.



    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Remove the 2 bolts.

  1. Lift up the seat track adjusting handle and move the seat to the center position. Also, operate the reclining adjuster release handle and move the seatback to the upright position.

  1. Disconnect the connectors under the seat.

  1. Remove the seat from the vehicle.

    NOTICE:
    Be careful not to damage the vehicle body.