Front Seat Assembly (W/ Front Seat Side Airbag) Installation
INSTALL FRONT SEAT ASSEMBLY
INSTALL FRONT SEAT HEADREST ASSEMBLY
INSTALL SEAT TRACK COVER LH
INSTALL INNER SEAT TRACK BRACKET COVER LH
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
CHECK SRS WARNING LIGHT
Front Seat Assembly (W/ Front Seat Side Airbag) -- Installation |
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
| 1. INSTALL FRONT SEAT ASSEMBLY |
Place the front seat assembly in the cabin.
- NOTICE:
- Be careful not to damage the vehicle body.
Connect the connectors and attach the wire harness clamp under the seat.
Temporarily install the front seat assembly with the 4 bolts.
Lift up the seat track handle sub-assembly LH and move the seat to the rearmost position.
Tighten the bolts in the order shown in the illustration.
- Torque:
- 37 N*m{377 kgf*cm, 27 ft.*lbf}
Lift up the seat track handle sub-assembly LH and move the seat to the foremost position.
Tighten the bolts in the order shown in the illustration.
- Torque:
- 37 N*m{377 kgf*cm, 27 ft.*lbf}
| 2. INSTALL FRONT SEAT HEADREST ASSEMBLY |
Install the front seat headrest assembly.
| 3. INSTALL SEAT TRACK COVER LH |
Attach the 2 claws in the order shown in the illustration to install the seat track cover LH.
- NOTICE:
- Be careful not to damage the claws.
| 4. INSTALL INNER SEAT TRACK BRACKET COVER LH |
Attach the 2 claws in the order shown in the illustration to install the inner seat track bracket cover LH.
- NOTICE:
- Be careful not to damage the claws.
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Toyota Fortuner RM000004W63000X.html).
| 6. CHECK SRS WARNING LIGHT |
(Toyota Fortuner RM000000XFD0EGX.html)
