Front Seat Assembly (W/ Front Seat Side Airbag) Installation
INSTALL FRONT SEAT ASSEMBLY
INSTALL FRONT SEAT HEADREST ASSEMBLY
INSTALL OUTER SEAT TRACK BRACKET COVER
INSTALL INNER SEAT TRACK BRACKET COVER
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
CHECK SRS WARNING LIGHT
Front Seat Assembly (W/ Front Seat Side Airbag) -- Installation |
- HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the RH side.
| 1. INSTALL FRONT SEAT ASSEMBLY |
Place the front seat assembly in the cabin.
- NOTICE:
- Be careful not to damage the vehicle body.
Connect the connectors under the seat.
Temporarily install the front seat assembly with the 4 bolts.
Lift up the seat track adjusting handle and move the seat to the rearmost position.
Tighten the bolts in the order shown in the illustration.
- Torque:
- 37 N*m{377 kgf*cm, 27 ft.*lbf}
Lift up the seat track adjusting handle and move the seat to the foremost position.
Tighten the bolts in the order shown in the illustration.
- Torque:
- 37 N*m{377 kgf*cm, 27 ft.*lbf}
| 2. INSTALL FRONT SEAT HEADREST ASSEMBLY |
| 3. INSTALL OUTER SEAT TRACK BRACKET COVER |
Attach the 2 claws in the order shown in the illustration to install the cover.
- NOTICE:
- Be careful not to damage the claws.
| 4. INSTALL INNER SEAT TRACK BRACKET COVER |
Attach the 2 claws in the order shown in the illustration to install the cover.
- NOTICE:
- Be careful not to damage the claws.
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Toyota Fortuner RM000002HD2002X.html).
| 6. CHECK SRS WARNING LIGHT |
Check the SRS warning light (Toyota Fortuner RM000000XFD06DX.html).
