Drive Belt Installation

While turning the belt tensioner counterclockwise, align its holes, and then insert a pin of φ6 mm (0.24 in.) into the holes to fix the belt tensioner.

Install the V-ribbed belt.

HINT:

If it is hard to install the V-ribbed belt, perform the following procedure.

1. Put the V-ribbed belt on everything except the PS pump as shown in the illustration.
   

2. While releasing the belt tension by turning the belt tensioner counterclockwise, put the V-ribbed belt on the PS pump.
   

While turning the belt tensioner counterclockwise, remove the pin.