Fuel Pump Installation

Attach the 2 claws to the claw holes and install the fuel suction support.

Install the fuel pump harness.

Apply a light coat of gasoline to a new O-ring, and install it to the fuel pump.

Attach the 3 claws to the claw holes and install the fuel pump and suction filter assembly.

Attach the 2 claws to the claw holes and install the fuel sub-tank.

Install the suction plate to the fuel sub-tank.

1. Install the 2 springs to the 2 shafts of the fuel suction plate.
   

2. Using needle-nose pliers, install 2 new E-rings to the 2 shafts.
   

   HINT:

   Slightly lower the sub-tank cap to install the E-rings.

Install the sub-tank cap.

1. Attach the 3 claws to the claw holes and install the fuel sub-tank cap.
   





2. Connect the 2 fuel tubes and fuel pump harness.
   

Connect the tube part to the fuel sub-tank.

1. Attach the claw on the end of the tube to the claw hole. Connect the tube to the 2 clamps on the fuel sub-tank.
   

Connect the fuel pump connector.

Set the sender gauge to the fuel sub-tank. Then slide the sender gauge downward to install it.

Connect the fuel sender gauge connector.

Install the fuel tank to the vehicle (Toyota Fortuner RM000000YLR00WX.html).