Vane Pump (For 5L-E) Disassembly

Remove the bolt and power steering suction port union.

Using a screwdriver, remove the O-ring from the power steering suction port union.

Remove the pressure port union.

Remove the O-ring from the pressure port union.

Remove the flow control valve and compression spring.

Remove the 4 bolts and vane pump rear housing.

Remove the gasket.

Remove the 2 O-rings from the vane pump rear housing.

Remove the wave washer from the vane pump rear side plate.

Remove the vane pump rear side plate.

Remove the vane pump cam ring.

Remove the 10 vane pump plates.

Using 2 screwdrivers, remove the vane pump shaft snap ring from the vane pump shaft.

Remove the vane pump rotor.

Using a screwdriver, pry out the vane pump housing oil seal.

NOTICE:

Be careful not to damage the vane pump front housing.