Automatic Transmission System Initialization

  1. RESET MEMORY

Automatic Transmission System -- Initialization



RESET MEMORY
NOTICE:
  1. Perform the RESET MEMORY procedures (A/T initialization) when replacing the automatic transmission assembly, engine assembly or ECM.
  2. RESET MEMORY can be performed only with the intelligent tester.
HINT:
The ECM memorizes the vehicle conditions when the ECT controls the automatic transmission assembly and engine assembly. Therefore, when the automatic transmission assembly, engine assembly, or ECM has been replaced, it is necessary to reset the memory so that the ECM can memorize the new information.
The reset procedures are as follows.

  1. Turn the ignition switch OFF.

  2. Connect the intelligent tester to the DLC3.

  3. Turn the ignition switch ON and push the intelligent tester main switch ON.



  4. Perform the reset memory procedures from the main menu.

    CAUTION:
    After performing the RESET MEMORY procedures, be sure to perform the Road Test (Toyota Fortuner RM000000W790K9X.html) as described earlier.
    HINT:
    The ECM learns through the Road Test.

    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.A750F Automatic Transmission.Automatic Transmission System.Automatic Transmission System Initialization