Automatic Transmission System Terminals Of Ecm

  1. CHECK ECM

Automatic Transmission System -- Terminals Of Ecm



CHECK ECM

Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.A750F Automatic Transmission.Automatic Transmission System.Automatic Transmission System  Terminals Of Ecm

  1. Measure the voltage of the ECM connector.

    HINT:
    Each ECM terminal's standard voltage is shown in the table below.
    In the table, first follow the information under "Condition". Look under "Symbols (Terminal No.)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specific Condition".
    Use the illustration above as a reference for the ECM terminals.

    Symbols (Terminal No.)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    NSW (E16-8) - E1 (E17-1)
    L-Y - BR
    Park/Neutral position switch signal
    Ignition switch ON and shift lever on P or N
    Below 2 V
    NSW (E16-8) - E1 (E17-1)
    L-Y - BR
    Park/Neutral position switch signal
    Ignition switch ON and shift lever not on P or N
    10 to 14 V
    STA (E17-11) - E1 (E17-1)
    B-Y - BR
    Starter signal
    Cranking
    6 V or more
    L (E13-9) - E1 (E17-1)
    GR-L - BR
    L shift position switch signal
    Ignition switch ON and transfer shift lever on L
    10 to 14 V
    L (E13-9) - E1 (E17-1)
    GR-L - BR
    L shift position switch signal
    Ignition switch ON and transfer shift lever not on L
    Below 1 V
    4 (E13-20) - E1 (E17-1)
    G-O - BR
    4 shift position switch signal
    Ignition switch ON and transfer shift lever on 4
    10 to 14 V
    4 (E13-20) - E1 (E17-1)
    G-O - BR
    4 shift position switch signal
    Ignition switch ON and transfer shift lever not on 4
    Below 1 V
    3 (E13-19) - E1 (E17-1)
    L - BR
    3 shift position switch signal
    Ignition switch ON and transfer shift lever on 3
    10 to 14 V
    3 (E13-19) - E1 (E17-1)
    L - BR
    3 shift position switch signal
    Ignition switch ON and transfer shift lever not on 3
    Below 1 V
    2 (E13-10) - E1 (E17-1)
    G-R - BR
    2 shift position switch signal
    Ignition switch ON and transfer shift lever on 2 and L
    10 to 14 V
    2 (E13-10) - E1 (E17-1)
    G-R - BR
    2 shift position switch signal
    Ignition switch ON and transfer shift lever not on 2 and L
    Below 1 V
    D (E13-21) - E1 (E17-1)
    G-Y - BR
    D shift position switch signal
    Ignition switch ON and transfer shift lever on D or 4
    10 to 14 V
    D (E13-21) - E1 (E17-1)
    G-Y - BR
    D shift position switch signal
    Ignition switch ON and transfer shift lever not on D or 4
    Below 1 V
    R (E13 -11) - E1 (E17-1)
    R-Y - BR
    R shift position switch signal
    Ignition switch ON and transfer shift lever on R
    10 to 14 V
    R (E13 -11) - E1 (E17-1)
    R-Y - BR
    R shift position switch signal
    Ignition switch ON and transfer shift lever not on R
    Below 1 V
    STP (E14-15) - E1 (E17-1)
    G-W - BR
    Stop light switch signal
    Brake pedal is depressed
    7.5 to 14 V
    STP (E14-15) - E1 (E17-1)
    G-W - BR
    Stop light switch signal
    Brake pedal is released
    Below 1.5 V
    S1 (E16-11) - E1 (E17-1)
    GR - BR
    S1 solenoid signal
    1st or 2nd gear
    10 to 14 V
    S1 (E16-11) - E1 (E17-1)
    GR - BR
    S1 solenoid signal
    3rd, 4th or 5th gear
    Below 1 V
    S2 (E16-10) - E1 (E17-1)
    W-L - BR
    S2 solenoid signal
    2nd or 3rd gear
    10 to 14 V
    S2 (E16-10) - E1 (E17-1)
    W-L - BR
    S2 solenoid signal
    1st, 4th or 5th gear
    Below 1 V
    SR (E16-9) - E1 (E17-1)
    G - BR
    SR solenoid signal
    5th gear
    10 to 14 V
    SR (E16-9) - E1 (E17-1)
    G - BR
    SR solenoid signal
    1st gear
    Below 1 V
    SL1+ (E16-19) - SL1- (E16-18)
    G-W - P-L
    SL1 solenoid signal
    Engine idle speed
    Pulse generation
    (see waveform 1)
    SL2+ (E16-17) - SL2- (E16-16)
    G-B - G-R
    SL2 solenoid signal
    Engine idle speed
    Pulse generation
    (see waveform 2)
    SLT+ (E16-13) - SLT- (E16-12)
    G-Y - L-B
    SLT solenoid signal
    Engine idle speed
    Pulse generation
    (see waveform 3)
    SLU+ (E16-15) - SLU- (E16-14)
    L - W
    SLU solenoid signal
    4th (lock-up) or 5th (lock-up) gear
    Pulse generation
    (see waveform 4)
    THO1 (E16-24) - E2 (E15-28)
    W-R - BR
    No. 1 ATF temperature sensor signal
    No. 1 ATF temperature: 115°C (239°F) or more
    Below 1.5 V
    THO2 (E16-32) - E2 (E15-28)
    B-Y - BR
    No. 2 ATF temperature sensor signal
    No. 2 ATF temperature: 115°C (239°F) or more
    Below 1.5 V
    NT+ (E16-35) - NT- (E16-27)
    L - Y
    Speed sensor (NT) signal
    Engine idle speed (shift lever on P or N)
    Pulse generation
    (see waveform 5)
    SP2+ (E16-34) - SP2- (E16-26)
    V - P
    Speed sensor (SP2) signal
    Vehicle speed 20 km/h (12 mph)
    Pulse generation
    (see waveform 6)
    L4 (E17-13) - E1 (E17-1)
    G-W - BR
    L4 shift position switch signal
    Ignition switch ON and transfer shift lever on L4
    Below 1 V
    L4 (E17-13) - E1 (E17-1)
    G-W - BR
    L4 shift position switch signal
    Ignition switch ON and transfer shift lever not on L4
    10 to 14 V
    TFN (E16-25) - E1 (E17-1)
    W-G - BR
    N shift position switch signal
    Ignition switch ON and transfer shift lever on N
    Below 1 V
    TFN (E16-25) - E1 (E17-1)
    W-G - BR
    N shift position switch signal
    Ignition switch ON and transfer shift lever not on N
    10 to 14 V


  2. Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.A750F Automatic Transmission.Automatic Transmission System.Automatic Transmission System  Terminals Of Ecm
  3. Using an oscilloscope, check the waveform 1.

    Waveform 1 (Reference):
    Item
    Content
    Symbols (Terminal No.)
    SL1+ (E16-19) - SL1- (E16-18)
    Tool Setting
    5 V/DIV., 1 msec./DIV.
    Condition
    Engine idle speed


  4. Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.A750F Automatic Transmission.Automatic Transmission System.Automatic Transmission System  Terminals Of Ecm
  5. Using an oscilloscope, check the waveform 2.

    Waveform 2 (Reference):
    Item
    Content
    Symbols (Terminal No.)
    SL2+ (E16-17) - SL2- (E16-16)
    Tool Setting
    5 V/DIV., 1 msec./DIV.
    Condition
    Engine idle speed


  6. Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.A750F Automatic Transmission.Automatic Transmission System.Automatic Transmission System  Terminals Of Ecm
  7. Using an oscilloscope, check the waveform 3.

    Waveform 3 (Reference):
    Item
    Content
    Symbols (Terminal No.)
    SLT+ (E16-13) - SLT- (E16-12)
    Tool Setting
    5 V/DIV., 1 msec./DIV.
    Condition
    Engine idle speed


  8. Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.A750F Automatic Transmission.Automatic Transmission System.Automatic Transmission System  Terminals Of Ecm
  9. Using an oscilloscope, check the waveform 4.

    Waveform 4 (Reference):
    Item
    Content
    Symbols (Terminal No.)
    SLU+ (E16-15) - SLU- (E16-14)
    Tool Setting
    5 V/DIV., 1 msec./DIV.
    Condition
    4th (lock-up) or 5th (lock-up) gear


  10. Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.A750F Automatic Transmission.Automatic Transmission System.Automatic Transmission System  Terminals Of Ecm
  11. Using an oscilloscope, check the waveform 5.

    Waveform 5 (Reference):
    Item
    Content
    Symbols (Terminal No.)
    NT+ (E16-35) - NT- (E16-27)
    Tool Setting
    1 V/DIV., 2 msec./DIV.
    Condition
    Engine idle speed (shift lever on P or N)


  12. Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.A750F Automatic Transmission.Automatic Transmission System.Automatic Transmission System  Terminals Of Ecm
  13. Using an oscilloscope, check the waveform 6.

    Waveform 6 (Reference):
    Item
    Content
    Symbols (Terminal No.)
    SP2+ (E16-34) - SP2- (E16-26)
    Tool Setting
    2 V/DIV., 2 msec./DIV.
    Condition
    Vehicle speed 20 km/h (12 mph)