Lower Instrument Panel -- Installation |
- HINT:
- A bolt without a torque specification is shown in the standard bolt chart (Toyota Fortuner RM00000118W017X.html).
| 1. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY |
Install the hood lock control cable lever and fuel lid control cable lever.
Connect all connectors, and attach all clamps to install the panel.
Install the panel with the 3 screws <F>, 2 bolts <A> and nut <G>.
| 2. INSTALL COWL SIDE TRIM BOARD LH |
 |
Attach the 2 clips to install the cowl side trim board.
Install the cap nut.
| 3. INSTALL COWL SIDE TRIM BOARD RH |
- HINT:
- Use the same procedures described for the LH side.
| 4. INSTALL FRONT DOOR SCUFF PLATE LH |
 |
Attach the 3 clips and 7 claws to install the front door scuff plate.
| 5. INSTALL FRONT DOOR SCUFF PLATE RH |
- HINT:
- Use the same procedures described for the LH side.
| 6. INSTALL SWITCH BASE |
 |
Connect all connectors.
Attach the 8 claws to install the switch base.
| 7. INSTALL NO. 1 INSTRUMENT PANEL BOX |
 |
Connect all connectors.
Attach all clamps to install the panel box.
Install the panel box with the 6 screws <B> and 2 clips.
| 8. INSTALL CONSOLE BOX ASSEMBLY |
 |
Install the console box with the 2 clips, 4 screws <F> and 2 bolts <E>.
| 9. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY |
 |
- NOTICE:
- Be careful not to damage the instrument panel lower and console box with the claws of the upper console panel.
Attach the 12 claws to install the console panel.
| 10. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY |
 |
Attach the 4 claws to install the hole cover.
| 11. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY |
 |
Twist the transmission shift lever knob in the direction indicated by the arrow to install it.
for 4WD:
Twist the transfer shift lever knob in the direction indicated by the arrow to install it.
| 12. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY |
 |
Attach the 2 claws and 3 clips to install the panel.
| 13. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY |
Install the headlight dimmer switch with the claw as shown in the illustration.
 |
Install the headlight dimmer switch with the clamp.
 |
Connect the connector.
 |
| 14. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY |
 |
Attach the claw to install the wiper switch.
Connect the connectors.
- NOTICE:
- Do not push the claw with excessive force as damage may occur.
| 15. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY |
Install the upper instrument panel (Toyota Fortuner RM000003O2K002X.html).
| 16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 17. CHECK SRS WARNING LIGHT |
Check the SRS warning light (Toyota Fortuner RM000000XFD06DX.html).