Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - DOOR LOCK
WIRELESS DOOR LOCK BUZZER - REMOVAL
- HINT:
| 1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH |
Remove the 3 bolts and screw.
Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly LH.
| 2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH |
Remove the 3 bolts and 2 screws.
Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly RH.
| 3. REMOVE UPPER RADIATOR SUPPORT SEAL |
Remove the 7 clips and radiator support seal.
| 4. REMOVE RADIATOR GRILLE ASSEMBLY |
Put protective tape around the radiator grille assembly.
| *1 | Protective Tape |
Remove the 3 screws.
Detach the 2 clips and 8 claws, and remove the radiator grille assembly.
w/ Wide View Front Monitor System:
Disconnect the connector.
| 5. REMOVE FRONT BUMPER COVER |
- HINT:
- For the front bumper cover with garnish, use the procedure described below.
Put protective tape around the front bumper cover.
| *1 | Protective Tape | - | - |
Using a T30 "TORX" socket, remove the 6 screws.
| *A | LH Side | *B | RH Side |
Remove the 3 clips, 4 screws and 4 bolts.
Detach the 10 claws and remove the front bumper cover.
w/ TOYOTA Parking Assist-sensor System or w/ Fog Light:
Disconnect the No. 4 engine room wire connector and remove the front bumper cover.
w/ Headlight Cleaner System:
Disconnect the headlight cleaner hose and remove the front bumper cover.
| 6. REMOVE WIRELESS DOOR LOCK BUZZER |
Disconnect the connector.
Detach the clamp and remove the buzzer.