INSTALL UNLOCK WARNING SWITCH ASSEMBLY

INSTALL IGNITION SWITCH LOCK CYLINDER ASSEMBLY

INSTALL TRANSPONDER KEY AMPLIFIER

INSTALL UPPER STEERING COLUMN COVER

INSTALL LOWER STEERING COLUMN COVER

CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

While pushing the pin, slide the warning switch to install it.

Connect the unlock warning switch connector.

Turn the ignition switch lock cylinder assembly to ACC.

Insert the ignition switch lock cylinder assembly into the steering column upper bracket assembly to install it.

Check that the ignition switch lock cylinder assembly is securely fixed in place.

Connect the transponder key amplifier connector.

Align the claw of the transponder key amplifier with the upper bracket.

Push in the transponder key amplifier and install it to the upper bracket.

• NOTICE:

• Do not push in the transponder key amplifier with excessive force as it may be damaged.

Attach the claw to install the upper steering column cover.

Attach the 4 clips to install the upper steering column cover onto the instrument cluster finish panel.

Attach the 2 claws to install the lower steering column cover.

• NOTICE:

• Do not damage the tilt and telescopic switch.

Install the 3 screws.

• Torque:
• 2.0 N*m{ 20 kgf*cm, 18 in.*lbf}