Seat Memory Switch (W/ Seat Position Memory System) - Installation

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT

SEAT MEMORY SWITCH (w/ Seat Position Memory System) - INSTALLATION

  • HINT:
Use the same procedures for LHD and RHD vehicles.
The procedures listed below are for LHD vehicles.
1. INSTALL SEAT MEMORY SWITCH
Seat Memory Switch (W/ Seat Position Memory System) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the seat memory switch the screw.

Connect the connector.

2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
Seat Memory Switch (W/ Seat Position Memory System) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Connect the connector.

Connect the front door lock remote control cable assembly LH and front door inside locking cable assembly LH to the front door inside handle sub-assembly LH.

Seat Memory Switch (W/ Seat Position Memory System) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 4 claws and 13 clips to install the front door trim board sub-assembly LH.

Install the 3 screws.

3. INSTALL DOOR ASSIST GRIP COVER LH

Attach the 8 claws to install the door assist grip cover LH to the front door trim board sub-assembly LH.

4. INSTALL FRONT DOOR ARMREST BASE PANEL ASSEMBLY LH

Connect the connector.

Seat Memory Switch (W/ Seat Position Memory System) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 5 claws to install the armrest base panel.

5. INSTALL FRONT DOOR INSIDE HANDLE BEZEL LH

Install the front door inside handle bezel LH to the trim board with the 7 screws.

6. INSTALL FRONT LOWER DOOR FRAME BRACKET GARNISH LH

Attach the clip and claw, and install the front door lower frame bracket garnish LH.