SEAT HEATER SWITCH (w/ Seat Heater System) - INSTALLATION

Use the same procedures for LHD and RHD vehicles.

The procedures listed below are for LHD vehicles.

1. INSTALL SEAT HEATER SWITCH

Attach the 2 claws to install the heater switch.

2. INSTALL SUSPENSION CONTROL SWITCH

Attach the 4 claws to install the control switch.

Connect the 2 connectors.

Attach the wire harness clamp.

3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

Connect the connectors.

Attach the 14 claws to install the console panel.

4. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY

Attach the 4 claws to install the box.

5. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY

Attach the 9 claws to install the panel.

6. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

Connect the connectors.

Attach the 7 claws to install the panel.

7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

Install the shift lever knob and twist it in the direction indicated by the arrow.

Seat Heater Switch (W/ Seat Heater System) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

8. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

Attach the 7 claws to install the panel pad.

Install the screw.

Install the clip.

9. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION

Attach the 7 claws to install the panel cushion.

10. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

Connect the connectors and 2 clamps.

Attach the 8 claws to install the panel pad.

Install the screw.

Install the clip.

11. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

Attach the 7 claws to install the panel cushion.