Rear Seat Cushion Heater (For 60/40 Split Seat Type 40 Side) - Installation

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT

REAR SEAT CUSHION HEATER (for 60/40 Split Seat Type 40 Side) - INSTALLATION

  • CAUTION:
  • Wear protective gloves. Sharp areas on the parts may injure your hands.
  • HINT:
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
1. INSTALL REAR SEAT CUSHION HEATER ASSEMBLY
Rear Seat Cushion Heater (For 60/40 Split Seat Type 40 Side) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Set the seat cushion heater with the name stamp side facing the seat cushion cover.

Install the seat cushion heater with new tack pins.

2. INSTALL REAR SEPARATE TYPE SEAT CUSHION COVER
Rear Seat Cushion Heater (For 60/40 Split Seat Type 40 Side) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.

  • NOTICE:
Be careful not to damage the cover.
When installing the hog rings, avoid wrinkling the cover.
Rear Seat Cushion Heater (For 60/40 Split Seat Type 40 Side) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 3 pieces of fastening tape.

3. INSTALL SEAT CUSHION COVER WITH PAD

Install the seat cushion cover with pad.

w/ Rear Seat Side Airbag:


Pass the side airbag wire harness through the hole in the seat cushion.

w/ Seat Heater System:

Rear Seat Cushion Heater (For 60/40 Split Seat Type 40 Side) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Pass the seatback heater wire harness through the hole in the seat cushion.

Rear Seat Cushion Heater (For 60/40 Split Seat Type 40 Side) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Connect the 2 seat heater connectors.

w/ Rear Seat Side Airbag:


Attach the side airbag wire harness clamps.

4. INSTALL REAR SEAT UNDER TRAY COVER RH
Rear Seat Cushion Heater (For 60/40 Split Seat Type 40 Side) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 4 claws to install the cover.

Install the 2 screws.

5. INSTALL REAR UNDER SIDE COVER LH
Rear Seat Cushion Heater (For 60/40 Split Seat Type 40 Side) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 2 claws and clip to install the cover.

Install the 5 screws.

6. INSTALL REAR SEAT COVER
Rear Seat Cushion Heater (For 60/40 Split Seat Type 40 Side) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 2 claws to install the cover.

Install the 3 screws.

Rear Seat Cushion Heater (For 60/40 Split Seat Type 40 Side) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 12 claws.

7. INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH
Rear Seat Cushion Heater (For 60/40 Split Seat Type 40 Side) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the cable clamp to connect the cable.

Rear Seat Cushion Heater (For 60/40 Split Seat Type 40 Side) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the hinge with the 2 nuts.

  • Torque:
  • 42 N*m{ 428 kgf*cm, 31 ft.*lbf}

w/ Rear Seat Side Airbag:


Attach the wire harness clamp.

w/ Seat Heater System:


Attach the wire harness clamp.

8. INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH
Rear Seat Cushion Heater (For 60/40 Split Seat Type 40 Side) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the hinge with the 2 nuts.

  • Torque:
  • 42 N*m{ 428 kgf*cm, 31 ft.*lbf}
9. INSTALL REAR NO. 2 SEAT PROTECTOR

Install the wire harness, and attach the 2 claws to close the protector.

Rear Seat Cushion Heater (For 60/40 Split Seat Type 40 Side) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the claw to install the protector to the seat hinge.

Install the clip.

Rear Seat Cushion Heater (For 60/40 Split Seat Type 40 Side) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

w/ Rear Seat Side Airbag:


Attach the claw to install the wire harness connector.

w/ Seat Heater System:


Attach the claw to install the wire harness connector.

10. INSTALL REAR NO. 2 SEAT LEG SIDE COVER
Rear Seat Cushion Heater (For 60/40 Split Seat Type 40 Side) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Pass the fold seat stopper band through the seat leg side cover and attach it to the seat cushion frame with the bolt.

Rear Seat Cushion Heater (For 60/40 Split Seat Type 40 Side) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 3 claws to install the seat leg side cover.

Install the 4 screws.

11. INSTALL UPPER SEAT TRACK RAIL COVER RH
Rear Seat Cushion Heater (For 60/40 Split Seat Type 40 Side) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 2 claws to install the cover.

12. INSTALL UPPER SEAT TRACK RAIL COVER LH
Rear Seat Cushion Heater (For 60/40 Split Seat Type 40 Side) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 2 claws to install the cover.

13. INSTALL REAR NO. 1 SEAT RECLINING COVER LH
Rear Seat Cushion Heater (For 60/40 Split Seat Type 40 Side) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 4 claws to install the cover.

Install the 2 screws.

14. INSTALL REAR NO. 1 SEAT RECLINING COVER RH
Rear Seat Cushion Heater (For 60/40 Split Seat Type 40 Side) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 3 claws in the order shown in the illustration to install the cover.

Install the 2 screws.

15. INSTALL RECLINING ADJUSTER RELEASE HANDLE RH
Rear Seat Cushion Heater (For 60/40 Split Seat Type 40 Side) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the release handle with the screw.

16. INSTALL SEAT ADJUSTER BOLT COVER
Rear Seat Cushion Heater (For 60/40 Split Seat Type 40 Side) - Installation. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Attach the 2 claws to install the cover.

17. INSTALL REAR NO. 1 SEAT ASSEMBLY RH

Install the rear No. 1 seat assembly ().