Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT
REAR NO. 2 SEAT ASSEMBLY (for Face to Face Seat Type) - REASSEMBLY
- CAUTION:
- Wear protective gloves. Sharp areas on the parts may injure your hands.
- HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
| 1. INSTALL REAR SIDE SEATBACK PAD LH |
Using hog ring pliers, install the seatback pad with new hog rings.
| 2. INSTALL REAR SIDE SEAT BAND SUB-ASSEMBLY |
Install the seat band with the screw.
| 3. INSTALL REAR SIDE SEATBACK COVER SUB-ASSEMBLY LH |
Install the seatback cover.
Pull out the seat band.
Using hog ring pliers, install new hog rings to the seatback cover.
- NOTICE:
Be careful not to damage the cover.
When installing the hog rings, avoid wrinkling the cover.
| 4. INSTALL REAR SIDE SEAT CUSHION PAD LH |
| 5. INSTALL REAR SIDE SEAT CUSHION COVER SUB-ASSEMBLY LH |
Install the seat cushion cover.
Close the 2 fasteners, and then close the cushion cover.
Using hog ring pliers, install new hog rings to the seat cushion cover.
- NOTICE:
Be careful not to damage the cover.
When installing the hog rings, avoid wrinkling the cover.
| 6. INSTALL REAR SEAT CUSHION LEG SUB-ASSEMBLY |
Install the spring to the seat cushion leg.
Install the seat cushion leg.
Install the 2 seat leg plates.
Install the 2 hinge pins and 2 new E-rings.