Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Disposal

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SEAT

REAR NO. 2 SEAT ASSEMBLY (except Face to Face Seat Type) - DISPOSAL

  • HINT:
Use the same procedures for the LH side and RH side
The procedures listed below are for the LH side.
1. DISPOSE OF NO. 2 SEAT STAY SUB-ASSEMBLY
Rear No. 2 Seat Assembly (Except Face To Face Seat Type) - Disposal. SEAT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Horizontally fix the seat stay in a vise with the piston-rod pulled out.

Wear safety glasses. Gradually cut a part between A and B shown in the illustration using a metal saw and gradually release the gas.

  • Standard:
  • AreaSpecified Condition
    a80 mm (3.15 in.)
    b10 mm (0.394 in.)
  • CAUTION:
  • As metal debris may be blown outward by the gas, you must:
Wear protective glasses.
Cover the area being cut.
  • NOTICE:
  • The gas inside the seat stay is colorless, odorless and harmless. There is a possibility that metal debris could scatter, so cover the part with a piece of cloth or other material.